Phone-GWP-conductive
01793 754 457
Mon - Fri | 08.00 - 17.00
Email GWP conductive
conductive@gwp.co.uk
Free advice and quotes

The widest range of protective case options from an independent UK supplier.

Market leading ESD safe packaging for any static sensitive products and components.

Huge range of options and impartial advice on genuinely sustainable packaging for your business.

SSI Schaefer EF Series

EF Series conductive tote containers
SSI Schaefer EF series clip on lid
SSI Schaefer EF series hinged lid
EF Series tote range
SSI Schaefer conductive totes
Conductive handling containers

Conductive Euro Containers

Extra tough conductive plastic tote boxes

The SSI Schaefer EF Series (Euro Fix) are the toughest ESD safe tote containers available. Available in over 17 sizes, plus lids and other customisation options, they provide excellent strength and high levels of static protection. This can reduce your costs through minimising damage caused by static / mishandling.

The Polypropylene material also offers increased lifespan, whilst easy clean surfaces enhance longevity. The use of foam, dividers and layer pads means they can be further customised as well. Read More

Available Colours:

SSI Schaefer ESD colours
  • No obligation (and no pressure) quotes for any anti static packaging
  • Free and impartial advice from UK based experts
  • Competitive pricing and wide distributor network

Description

More info on SSI Schaefer EF Series Containers

The conductive SSI Schaefer Euro containers provide your products, components, and tools with market leading protection in a number of ways.

Firstly, the conductive Polypropylene material channels any static charges around the outside of the container, protecting any static sensitive items within.

In fact, these ESD safe containers specific volume resistance of 103 Ohm x cm and specific surface resistance of 104 Ohm.

Secondly, the tough, robust material also provides the highest levels of physical protection – everything from being dropped, crushed and general mishandling during normal transit and storage operations.

The levels of protection can be further enhanced through the addition of a standard range of lids. Available in hinged or clip on varieties, the lids offer further protection against dust and moisture, alongside the resistance to grease, oils and alkalis of the material itself.

The use of custom interiors for these boxes – such as Correx® dividers, custom foam inserts or even the range of EF compatible insert boxes – can all increase protection levels too.

This is achieved through minimising the movement of items within during transit. The anti-static foam options in particular also offer a degree of cushioning protection.

Ultimately, this can all add up to significantly lower your business’ costs through less stock written off as damaged, fewer customer returns and even an enhanced perception of your company aiding repeat sales (through reliable supply).

Improve efficiency whilst reducing costs

Besides the protection offered to your items, the SSI Schaefer EF Series boxes can also improve the efficiency of your operations.

The range of sizes have been designed to work alongside most industry standard sizes of racking, conveyors etc., which makes them perfect for both manual and automatic handling environments.

If being used manually, the integrated handle allows for quick and easy lifting and movement of the containers by your production or warehouse teams. The inbuilt rims also allow for safe and easy stacking of the containers.

This efficiency can be further enhanced through the use of varying inserts (foam, division sets etc.) as it allows for the efficient movement of multiple items within a single container. The load capacity of 20kg ensures that this is still the case, even with larger and /or heavier items.

And finally, the smooth surfaces also ensure that the totes are easy to clean. This again improves their usable lifespan, whilst also making them an ideal choice for medical or clean room applications.

Key benefits of SSI Schaefer EF Series at a glance

  • Moulded polypropylene material provides both strength and durability
  • Exceptional conductive performance to keep static sensitive items safe
  • Can be combined with ESD foam or divider sets to further reduce damage
  • Lid options to offer further protection from moisture and dust
  • Resistant to oils, alkalis, moisture, dust, and grease, protecting items within
  • Fully operational at lower temperatures (will not shatter / crack)
  • Range of sizes designed to work seamlessly with your existing racking / conveyors etc.
  • Stacking rims allow for safe stacking and optimum use of storage space
  • Handle design allows for easy and efficient handling by production or warehouse staff
  • Insert boxes / dividers allow efficient movement of multiple items
  • Up to 20kg loads allowing for efficient handling of heavier or multiple items
  • Easily cleaned surfaces to further boost lifespan
  • Perfect for both manual and automatic / semi-automatic handling

Size Table

Open Hand Hole Totes:

Part No. Internal Size External Size
EF 4140 353 x 253 x 116 mm 400 x 300 x 140 mm
EF 4170 353 x 253 x 146 mm 400 x 300 x 170 mm
EF 6180 552 x 352 x 156 mm 600 x 400 x 180 mm
EF 6220 551 x 351 x 196 mm 600 x 400 x 220 mm
EF 6240 552 x 352 x 216 mm 600 x 400 x 240 mm
EF 6280 551 x 351 x 260 mm 600 x 400 x 285 mm
EF 6420* 551 x 351 x 395 mm 600 x 400 x 420 mm

Closed Hand Hole Totes:

Part No. Internal Size External Size
EF 2120 152 x 104 x 102 mm 200 x 150 x 117 mm
EF 3120 252 x 152 x 102 mm 300 x 200 x 117 mm
EF 4040 357 x 257 x 27 mm 400 x 300 x 40 mm
EF 4080 357 x 257 x 67 mm 400 x 300 x 80 mm
EF 4120 352 x 254 x 105 mm 400 x 300 x 120 mm
EF 4220 353 x 253 x 196 mm 400 x 300 x 220 mm
EF 4320 359 x 259 x 306 mm 400 x 300 x 320 mm
EF 6070 555 x 355 x 59 mm 600 x 400 x 75 mm
EF6140 552 x 352 x 116 mm 600 x 400 x 140 mm
EF 6120 552 x 352 x 96 mm 600 x 400 x 120 mm
EF 6220 551 x 351 x 196 mm 600 x 400 x 220 mm
EF 6320 552 x 352 x 295 mm 600 x 400 x 320 mm

Technical

Conductive performance figures

Specific Volume Resistance: <10³ Ohm x cm

Specific Surface Resistance: <10⁴ Ohm

FAQs

Common queries about SSI EF Series

Please see below for the most commonly asked questions on the topic of the SSI Schaefer EF Series conductive range of containers.

What does EF stand for?

The EF in the SSI EF Series containers stands for “Euro Fix”. What this essentially means is that these containers are designed to work with typical equipment, racking etc. used in warehouses and production facilities throughout Europe.

What size EF Series conductive totes are available?

There are 17 sizes within the EF series range of tote containers. However, these can be modified further with inserts (including the EF Series dedicated inset boxes) as well as the choice of lid options. The stock sizes have also been designed in order that they are compatible with the vast majority of standard conveyors, racking, warehouse equipment etc.

Are moulded plastic containers more expensive than corrugated equivalents?

Whilst the initial investment required to purchase moulded plastic containers is typically higher than for corrugated cardboard or Correx® equivalents, the strength and durability provided by the material does offer improved longevity. This means that the overall lifetime costs are frequently lower.

Can these EF containers be stacked?

Besides minimising any health and safety risks associated with stacking containers, this feature also allows for the optimum use of space within your plant or factory. This reduces the storage required and maximises the efficiency of your warehouse.

I only need a low volume of containers – is this possible?

The extensive stock holding of these containers at GWP means that you can cost effectively order them in practically any volume. Plus, with lead times as short as 48 hours, you can further reduce your stock holding to create space within your facility for the storage of other items or increased production capacity.

Free Quotes / Advice

Buy SSI Schaefer EF Series conductive euro containers

Having been trading for over twenty-five years – and with more than 85% market share in the UK – a huge number of international, blue-chip electronics manufacturers utilise the products GWP manufacture / supply.

For two of these – the EF and LF Series conductive handling products – GWP Conductive are also the exclusive UK stockholders. This allows your business to source these products at exceptionally cost-effective prices, in practically any volume, and with lead times as short as forty-eight hours.

Besides this, your business can benefit not only from the most extensive range of anti-static packaging from a single supplier, but from a wide range of exclusive products too. This includes the industry standard Corstat® coated fibreboard.

However, if a stock product is not exactly what you require, a team of expert designers – with detailed knowledge of successful ESD safe packaging – can create a bespoke solution tailored to your precise requirements.

This level of service and expertise is further enhanced through no obligation quotes and advice, a sampling service, and the highest level of customer support at all times.

Inserts & Options

Enhance your SSI Schaefer EF Series Containers

There are a number of ways in which you can enhance your EF Series conductive containers (and other forms of anti-static packaging) – please see below for further details.

An assembled set of Corriplast tote dividers

Divider Sets

Corriplast colour

2 x Materials
Modular Layouts

SSI Schaefer EF Series insert boxes inside a larger outer container

EF Insert Boxes

Conductive packaging colours

4 x Sizes
Modular Layouts

Container foam inserts

ESD Foam

Conductive foam colours

4 x Options
Custom Designs

Vac formed tray

Vac Form Trays

Vac formed trays colour options

Custom Sizes
Enquire for info

SSI Schaefer EF Series lid options

Lid Options

Conductive packaging colours

Hinged / Clipped
Enquire for info

Similar ESD / Standard Handling Options

Wide range of ESD safe and standard tote containers / handling products

Two Corstat stacking totes (stacked) containing a large PCB

Corstat® Stacking Totes

Corstat colour

7 x Sizes
Custom Options

Euro containers

Standard Euro Containers

Plastic parts bins colours

5 x Sizes
Enquire for info

A Q Grip conductive tote

Q Grip Custom Size Totes

Corriplast colour

Bespoke Sizes
Various options

Correx totes

Correx® Handling Totes

Correx picking bin colour options

Custom Size / Designs
Enquire for info

Quotes, technical info and advice

    Required details


    Additional info


    For full details on how GWP treats your data, please view our Privacy Policy. Your information is not shared with any third party.

    Speak with our ESD packaging experts

    Fiona Churchward, GWP Conductive product adviser

    Fiona Churchward

    Product Adviser
    conductive@gwp.co.uk
    01793 754 457

    Brenda Plinta

    Brenda Plinta

    Sales Coordinator
    conductive@gwp.co.uk
    01793 754 457

    Emily Parker, GWP Correx sales office manager

    Emily Parker

    General Manager
    conductive@gwp.co.uk
    01793 754 444

    Phone GWP

    01793 754 457

    Mon – Fri 08.30 – 17.00

    Email GWP

    conductive@gwp.co.uk

    Email a conductive packaging expert

    If you could benefit from physical and static protection, you can source EF Series containers from an extensive distribution network.

    ×